swimming pool equipment factory
pump

square cover swiming pool water pump

Model:SP-1002
Usage: swimming pool water pumping
Voltage: 220V/380V
Power: 750W/1500W/2200W
Packing: carton
Color: black and yellow
OEM: ACCEPTED
INQUIRY
Description


High-density sealed design, reliable performance, in the long-term operation the sealed state is stable

Long service life and other characteristics. Eliminate pool water pump leakage,

Easy maintenance, Safty use.

Excelent Performance, perfect workmanship

High-strength plastic transparent cover, with hair filters, ultra-low mute; knob convenient, tight seal, energy saving and environmental protection.

After-sales service

From customer consultation to specific project parameters measurement, quotation, and then transportation, installation and a series of links for professional guidance, the full solution for the customer solution worries.

After many years of grinding experience, our team, growing. Has become a reliable and strong team

SP SERIES WATER PUMP

  • 1. Water pump should be installed outside of the pool (cylinder), under the normal water level, the installation must be level and strong.
  • 2. The inlet and outlet pipes connected the water pump should be tight without water leakage.
  • 3. Connect the power supply wiring according to the wiring diagram on the motor nameplate. Each pump should be provided with a fixed power supply. The power supply should comply with the voltage and frequency marked on the nameplate. The power supply must be equipped with safe and reliable leakage protection switch.
  • 4. The motor must be connected to a suitable ground wire to prevent electric shock.
  • 5. Three-phase motor water pump should be no-load instantly through the film machine 0.5-1 seconds to confirm the motor rotation and identification in line with the water can turn on.
  • 6. Water pump should be filled before filling the water tank and tighten the cover to start running.
  • 7. Pumps in the winter when deactivating, should drain the water in the pump, in order to prevent the cold burst. The filter should be cleaned regularly to prevent clogging.
  • 8. Mechanical seal (water seal) after use for a long time there may be wear dripping, this situation, only need to replace the accessories can be used normally.
Review